Garage doors are designed to last many years, but they are one of the most used systems in a home and inevitably something will fail. Recognizing common problems allows a homeowner to do simple repairs and avoid dangerous situations. The following describes the most common problems.
The Door Won’t Open or Close
Possibilities:
- Dead remote control batteries
- Opener is unplugged
- Breaker tripped
- Safety sensors out of alignment
- Door locked using wall control’s lock feature
Quick fixes: Check the battery condition in the remote control, plug in the opener and make sure the lock feature on the wall control is not engaged. For a misaligned safety sensors, use a piece of paper and sweep the sensors to clean them, and check to make sure they are aimed at each other. If the door still does not function, the opener or a broken spring may be the problem.
Loud Grinding, Squeaking or Popping
Garage doors are never completely silent, but noises all of the sudden or abruptly can be a warning.
- Squeaking is caused by dry rollers or hinges. Apply lubricant and not a heavy grease.
- Grinding noise is caused by worn rollers or an obstructed track.
- popping noise is caused by problems with spring tension.
- Lubricating and/or cleaning noisy garage doors fix most issues. Popping or banging noises should be checked by a professional.
Lubricating and cleaning solves many noise issues. Popping or banging should be inspected by a technician.
Uneven Doors
A crooked door can lead to all sorts of problems. If one side of the door starts rising faster than the other, the door will get stuck in the tracks. Some reasons for this can include a loose cable, bent track, or a broken spring. An off balance door can put a lot of stress and put a huge strain on the opener, creating a safety hazard. If you have problems like these, stop using the door and have a professional take a look.
Door Reverses Before Closing
If the door touches the ground and immediately goes back up, the opener could think there is something in the way and try to reverse. Make sure the sensors are not blocked or misaligned. Check the path for any obstructions and make sure there is nothing blocking it. If there is nothing wrong with the sensors and the path, check your owner’s manual and see if it can tell you how to adjust the limit setting.
Broken Spring
The balance of a door is held in place with either torsion or extension springs. When one of them breaks, the door becomes extremely heavy and really puts a strain on the opener. A broken spring is also a dangerous situation because the spring can be under a lot of tension. This can also lead to injuries and is something that is best left to the professionals.
Worn Weatherstripping and Gaps
If there are gaps between the door and the floor of the garage, leaves, dirt, pests, and other critters can get in. This can also affect energy efficiency. Replacing the weather stripping is a cheap and easy fix that makes the garage safer and more energy efficient.
Do It Yourself vs. Professional?
Posts on this site may contain brand partnerships, promotional content, or affiliate links. I may earn a commission or fee if you click a link or purchase through these recommendations at no additional cost to you.
A general guideline: do handling cleaning, lubrication, battery swaps, and sensor adjustments yourself. Leave the rest to the pros. A residential and commercial garage door company that services homes and businesses is likely to have the tools, parts and experience to handle high tension components and offer preventative maintenance plans to catch small issues before they become costly.
When Repeated Repairs Mean Something Bigger Is Wrong
If you find yourself calling for service on your garage door a few times a year, consider the cost of repetitive repairs versus the cost of a new door. Older garage doors (15+ years) often lack modern safety features, and insulation which can also contribute to higher operating costs. When looking to replace your door, you can benefit from seeing how local companies in your area communicate their processes, as they may be more relatable and relevant. The page, garage door installation in Newport, is an excellent example.
A Simple Monthly Routine
- It is wise to invest 10 minutes a month into maintaining your garage door. Not only will this extend the life of your garage door, but it will also help you avoid the hassle and costs associated with unexpected breakdowns.
- With each month’s inspection, listen for strangeness as the door opens and closes. Also, test the auto-reverse feature by briefly placing a roll of paper towels on the door.
- As you continue the inspection, look for fraying or wear and tear on the cables and rollers. Inspect the tracks and sensor lenses for build up.
- Finally, be sure to lubricate rollers, hinges and springs.
Final Thoughts
Odd noises and movement should be addressed before they become a major issue. If something doesn’t feel or sound right, there is a good chance something is amiss. Knowing when it’s time for a replacement and when repairs are warranted will also help you avoid the headaches associated with garage door maintenance. Above all, maintaining your garage door will help preserve it’s function and safety for you and your family.

